Plastic mold injection processing, air quality detector shell mold custom production and processing plastic mold
What can be done to prevent problems before the mold is injected?
Injection mold is a manual work, it is divided into two kinds of thermosetting and thermoplastic, according to the molding process can be divided into six types. Injection molding is mainly to produce and process some materials with more complicated shapes. The melted plastic is mainly introduced into the material by an injection molding machine, and finally cooled and formed. But in this process, some accidents may occur. In order to avoid accidents, we should do the following work.
1: During the working hours of plastic molds, employees are not allowed to wear slippers. If the workshop has a number, iron objects will crush the feet to prevent the floor from slipping and falling. When getting on and off the mold, technicians and foremen must wear protective shoes to go to work to prevent bruising.
2: When using the blades, the plastic mold manufacturing employees must have their blades facing outwards and not facing themselves to prevent personal injury from negligence.
3: All employees are not allowed to wear long hair when they go to work. Women with long hair should tie their hair together. Do not wear long pendants on your chest to avoid other accidents.
4: If the employee finds the machine is abnormal, he should find a technician to handle it in time. Do not disturb the machine, such as water cut, sticky mold, no product, etc., do not put your hands and head into the mold to prevent the machine from malfunctioning and pressing on your hands.
5: When the employee is in the vertical machine, be sure to check the two-way switch. Only one switch is not properly clamped. It is not normal to press a switch to close the mold. When the horizontal machine is turned on, the front door will be closed and the mold will be abnormal.
6: When employees are on the machine, they must put the release agent on the table to prevent high temperatures. It is strictly forbidden to put it on the machine. Do not use a lighter when spraying. White oil and alcohol are strictly prohibited in the injection molding department. Some products require white oil and alcohol. A special area (with special fire extinguishers) must be designated. This area is separated from the machine base and flammable and explosive materials, and the use of white oil and alcohol is restricted (placed on a fixed shelf that is not easy to ignite). The area and boundary are determined by the supervisor, and the general assistant reports to the manager for approval and supervision.